The retired couple was excited at the possibility of getting help replacing their water heater. They admitted the old unit was working, but didn't seem to think it was providing as much hot water as it once did. With just the two of them, there was not a huge demand for gallons and gallons of hot water like there would be with a large family.

There are other skills plumbers need aside from being able to work with water. One of the most common things that a drain repipe on is fixing water lines.

85. Know your IRPCS International Rules for Preventing Collisions at Sea and be aware of how you should approach water line repair or cross a traffic separation scheme TSS).



After you have the stems out you should be able to find the washer on the "inside" end. If it is nicked, torn or brittle it is likely the cause of your drip. Even if it looks brand new, go ahead and replace it. You've already come this far. You can get replacement washers at almost any hardware store. Sometimes you may want to replace the whole stem, especially if the handle end is stripped out. It's best to just take the stem with you to the store and see if you can match it up. Most Do It Yourself stores have replacement stems for many popular brands. If your valve has a center diverter valve to switch the waterfrom the tub spout to the shower head the same process applies. Many times it is easier to replace the diverter stem than to repair it. This really depends on the design of the stem.

Blisters in asphalt or felt roofs only need to be treated if they contain water or have caused the roof covering to leak. Press the blister to check if moisture is expelled. If so, it must be sealed with a patch.

The water line repair most likely damaged your electrical outlets and lighting fixtures. Have a qualified electrician come in to evaluate and repair the electrical.

Plumbers, contractors, landscapers, and related professionals are often indexed by numerous online websites eager for you to visit their "directory". Each field will have their own group of websites competing for your attention. In the end these "Plumbers Directories" are often incomplete, and frequently provide little more information than the phone book.

Then, you can take your new shower parts home and reinstall them in the inner assembly. It is very important that everything be aligned properly and tightened to prevent leaks. Beware of over tightening, however, since this can also cause problems. Once you are sure everything is installed properly, replace the cover plate and turn the water back on to test your repair work. With a little bit of work, your do-it-yourself shower repair project can be a success. It does not take an expert, just a little effort and know how.